Electricity And Its Effect1



Electricity and its effects -electric intensity, potential, potential difference

Electricity is the physical flow of electrons, referred to as an electrical current. Electricity is an energy carrier that efficiently delivers the energy found in primary sources to end users, who in turn convert it into energy services.

Electricity can be created in three ways:

  • The most common is through electro-magnetic conversion, where electricity is generated by moving an electric conductor, such as a wire, inside a magnetic field. The most practical example of this method is a generator connected to a turbine.  The turbine provides the motion required to move the conductor in the generator.  This energy for motion can come from various technologies, for example wind turbines, hydropower, or the steam created from heat produced in nuclear fission or coal combustion.
  • Electricity can also be created through a chemical reaction, for example in a battery or fuel cell.
  • Finally, electricity can be created through solid-state conversion, wherein electricity is generated using the structure and properties of a solid. The specially constructed solid consists of different molecules packed closely together that create an electric current when stimulated. An example of a technology that utilizes solid state conversion is a solar PV cell.

It is important to note that electricity is the same, regardless of how it is produced. Thus the electricity generated from an electromagnetic generator is the same as that from a battery. Once electricity is created it is the most versatile form of energy.  

The rate at which electricity is produced is referred to as a Watt.  The quantity of energy used over a certain period of time is refered to as kWh and is the measure you would see on your power bill.

Electricity is often misunderstood and unappreciated, but modern societies are vitally dependent upon it. Electricity is essential to every day lives – from lighting, heating and cooling to powering televisions, computers and cellphones.

When electricity is produced, it must be used immediately. With current technologies, It is not yet economically viable to store large quantities of electricity. For this reason, the grid must be managed, every minute of every day, to balance electricity supply with demand.

Depending on the generation source of electricity, electricity production can have significant environmental and health impacts. Thermal generation sources produce air pollutants that can cause significant harm to human health. The production of electricity can also contribute significantly to global greenhouse gas emissions. Globally, 40% of energy-related carbon dioxide emissions are from electrical generation. Renewable sources of electricity like solar and wind produce zero direct carbon emissions but only generate electricity on an intermittent or variable basis. Hydrocarbon resources like coal and natural gas, although carbon intensive, are the most convenient sources used to generate baseload power to meet consumer demand at any given time.

Electric intensity

Electric intensity is the strength of electric field at a point.  Electric intensity at a point is defined as the force experienced  per unit positive charge at a point placed in the electric field.

Potential

The potential energy for a positive charge increases when it moves against an electric field and decreases when it moves with the electric field; the opposite is true for a negative charge. Unless the unit charge crosses a changing magnetic field, its potential at any given point does not depend on the path taken.

Although the concept of electric potential is useful in understanding electrical phenomena, only differences in potential energy are measurable. If an electric field is defined as the force per unit charge, then by analogy an electric potential can be thought of as the potential energy per unit charge. Therefore, the work done in moving a unit charge from one point to another (e.g., within an electric circuit) is equal to the difference in potential energies at each point. In the International System of Units (SI), electric potential is expressed in units of joules per coulomb (i.e., volts), and differences in potential energy are measured with a voltmeter.

potential difference

The electrical potential difference is defined as the amount of work done to carrying a unit charge from one point to another in an electric field. In other words, the potential difference is defined as the difference in the electric potential of the two charged bodies.

 

When a body is charged to a different electric potential as compared to the other charged body, the two bodies are said to a potential difference. Both the bodies are under stress and strain and try to attain minimum potential. The unit of potential difference is volt.

 

 


UKPCS Notes brings Prelims and Mains programs for UKPCS Prelims and UKPCS Mains Exam preparation. Various Programs initiated by UKPCS Notes are as follows:- For any doubt, Just leave us a Chat or Fill us a querry––