Metallurgy concentration, roasting, smelting

Metallurgy concentration, roasting, smelting

Roasting

It is a process wherein the ore is heated either alone or with some other material in excess of air below the fusion point of the ore. Usually, this method is used for sulphide ores. In roasting, definite chemical changes take place to form oxide or chloride of the metal. Ores of metals like zinc, lead, copper and nickel, when roasted in air, are converted to their oxides. Ores of some metals like lead may get partially oxidized and converted to sulphate. In such case, it is called sulphating roasting or partial roasting. Ores of metals like silver and gold are mixed with common salt and are heated in air. They are converted to their chlorides which are easy to reduce. This type of roasting is called chlorinating roasting. The purpose of roasting is to convert the ore in a form suitable to reduce. The gaseous product of sulphide roasting, sulphur dioxide is often used to produce sulphuric acid.

Smelting

Smelting is the basic process by which one produces workable metal from metal ores. The minerals in copper ores are reduced to copper through mixing carbon with the ore and heating the combination to about 1,100°C. (This can be done directly with copper oxide ores. Copper sulphide ores are heated in contact with air first.) At this temperature the metal, now liquid, flows to the bottom of the furnace, and the remaining matter (slag) floats to the top, whence it is removed. (Slag usually includes large amounts of silicon and related material and produces waste heaps of glass-like or cinder-like material.) Although this sounds straightforward, in antiquity, and especially before the invention of a bellows, it was difficult to attain the necessary temperature, and the extraction of copper from slag was in fact a difficult, messy, and extremely labor-intensive project.

Smelting produces a blob of metal (called bloom) prepared for the next step. In the case of copper, that step is often casting.

Iron has a higher melting point than copper. But below its melting point iron can still become spongy and amenable to treatment by hot hammering (forging), which helps to extract some of the remaining impurities.

Refining

Metals obtained by reduction processes still contain some objectionable impurities and hence have to be refined. Refining techniques vary widely from metal to metal and also depend on the use to which a metal has to be put. Sometimes during refining some substances may have to be added to impart some desirable characteristics to the metal. In some cases a metal is refined to recover valuable by-products present as impurities. Some of the refining processes used are defined below.

By Poling

By Liquation

Readily fusible metals like Sn, Pb and Bi are refined by this method. Impure metal in the form of ingots blocks in the upper part of a sloping hearth (usually of a reverberatory furnace) maintained at a temperature slightly above the melting point of the metal. The impurities remain behind as dross while the pure metal melts and flows down into a well at the bottom of the incline.

By Cupellation

This method employed to purify silver containing lead as an impurity. The impure silver is heated in a shallow vessel made of bone-ash under a blast of air. The lead is easily oxidized to powdery lead monoxide. Most of it is carried away by the blast of air. The rest melts and is absorbed by the bone ash cupel. Pure silver is left behind. Silver itself is not oxidized under these conditions.

By Distillation

Some metals have very low melting point and soon vaporize on heating while the associated impurities remain the solid state. Zinc, mercury and arsenic are purified by this method. Vacuum distillation gives very pure product and is used in the refining of the metals of IA and IIA.

By Fractional Distillation

This process is applied for the separation of cadmium from zinc. In the metallurgy of zinc, the metal is invariably associated with cadmium. The impure zinc is mixed with powdered coke and heated when the first portion of the condensate contain cadmium while zinc is obtained in the subsequent portions.

By Electrolytic Refining

This a very convenient method for refining many impure metals. Most of the metals such as copper, silver, gold, zinc and chromium are refined electrolytically. The impure metal is made the anode and a thin sheet of the pure metal as cathode. A solution of a salt of the metal serves as the electrolyte. On passing an electric current through the electrolyte, the metal dissolves in the electrolyte by oxidation of the anode and pure metal is deposited at the cathode. The impurities present in the anode either dissolve in the electrolyte or collect below the anode as anode mud. In the electrolytic refining of copper, impurities of iron and zinc are dissolved in the electrolyte and white gold, platinum and silver are left behind as anode mud.

Van-Arke Method

This is used for getting ultra pure metals. The principle involved is to convert the metal to a volatile unstable compound and to subsequently decompose it to give the pure metal. The impurities present should be such as not to be affected. Metals like titanium, zirconium etc. are purified by using this method.

Ti(s) + 2I₂(g) Ti I₄(g)
TiI₄(g) Ti(s) + 2I₂(g)
Pure

Zone- Refining

Meals of very high purity can be obtained by this method by removing an impurity, which shows difference in solubility of the liquid and solid states of the metal. A circular heater is fitted around a rod of impure metal and is slowly moved down the rod. At the heated zone, the rod mellts and as the heater passes on, pure metal crystallizes while impurities pass into the adjacent molten part. In this way, the impurities are swept over one end of the rod, which is finally discarded. The heater may have to be moved from one end to the other more than once. Ge, Si and Ga are used as semiconductors are refined in this manner; gallium-arsenide and indium-antimonide are also zone refined.

Chromatography (Ion Exchange Method)

Chromatography is based on the differential adsorption of the various components in a mixture on a suitable adsorbent. In its various forms like column chromatography, TLC (Thin Layer Chromatography), GLC (Gas Liquid Chromatography), Ion-exchange chromatography and Paper chromatography, it is widely used for the separation of mixtures and concentration, identification and refining of materials.

UKPCS Notes brings Prelims and Mains programs for UKPCS Prelims and UKPCS Mains Exam preparation. Various Programs initiated by UKPCS Notes are as follows:-

For any doubt, Just leave us a Chat or Fill us a querry––